Option Guide DROP DOWN!!
Choosing a Pattern
For no additional charge, you can add a pattern to your device. Below are some of the pattern options.
Note: All patterns shown may look different or be unavailable on other devices.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Choosing Your Matching Drip Tip
"MTL" Bore Dimensions: 3mm
We CANNOT make the Bore Larger Than the Regular Bore Dimensions Above
RDA/BORO STYLES |
-12mm Tall, 10mm Mouth, 4.5mm Bore
|
|
- 12mm Tall, 11.5mm Mouth, 4.5mm Bore |
|
- 10mm Tall, 10.5mm Mouth, 4.5mm Bore |
|
- 10mm Tall, 11mm Mouth, 4.5mm Bore |
|
- 11m Tall, 10.5mm Mouth, 4.5mm Bore |
|
- 9mm Tall, 14.5mm Mouth, 4.5mm Bore |
|
- 16mm Tall, 8mm Mouth, 3mm Bore |
|
- 15mm Tall, 8mm Mouth, 3mm Bore |
|
- 9mm Tall, 11.5mm Mouth, 4.5mm Bore |
|
- 9mm Tall, 10.5mm Mouth, 4.5mm Bore |
|
- 9mm Tall, 12mm Mouth, 4.5mm Bore |
|
|
|
Options for MTL of Full Bore Cannot be Married |
|
- 9mm Tall, 11.5mm Mouth, 4.5mm Bore |
|
- 10mm Tall, 10.5 mm Mouth, 4.5mm Bore |
50-50 Styles |
15mm Tall, 10.5mm Mouth, 4.5mm Bore |
|
|
|
|
What is a Married Material/Accent Bezel?
The Married Material (or Accent Bezel) is a different material that is added - "Married"- to the primary material choice in the form of a ring around the fire button and or the top edge of the tip
Some Materials cannot be married and certain marriages aren't compatible (Clear with Billet accent does not work but Billet with Clear accent does, we will choose the best marriage for whatever materials you decide on)
Matte Materials cannot Be Married.
For example, the image below shows an acrylic material with the Married Material: Billet Aluminum
Other Examples:
Color Options
All colors are Dyed and Sealed by Default, this helps preserve the bright and vibrant coloring of your device, however scuffs and scratches are part of life and there's not much that can be done about that.
If you wish to have your device Unsealed, leave a note at checkout. An unsealed device will wear and distress over time and handling. The color will fade and its initial bright color will become darker as the Black Meat of the material becomes more prominent.
Splash Colored Device HAVE TO be sealed or the colors will bleed together.
Black is the Natural Color for the Nylon Material we use, it is wear and tear resistant and easy to clean and maintain. Black is NOT SEALED
Grey is a Superficial Layer of Skin over the Black meat of the device, it will naturally darken and wear over time, high spots in patterns will become black and distressed with use.
We recommend a warm damp (NOT SOAKING) soapy rag for spot cleaning and regular maintenance. Alcohol and rag or QTip can be used to remove liquid stains if caught early, and a light wipe down with Coconut oil or similar will help maintain luster and surface finish while providing some level of waterproofing. NOTE that no colors are guaranteed to NOT wear. All shades of color vary from device to device and pictures are for general reference only.
If you are unsure on how to clean and care for your device properly Please contact Charles Via FB Messenger for further information.
Single Color Options |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single Splash Devices are Black with Splash of Chosen Color
Double Splash are Black and Grey with Splash of Chosen Color.
We do not offer Splashing 2 colors because all Dyes are transparent and will just make Mud.
Single Fade 2 Colors Faded Top to Bottom, you choose both. Some color combinations are not possible and have been eliminated
Splash Fade is a combination of the 2 styles.
Splash Colors (June/December and Special Batches ONLY) |
|
|
|
|
|
|
|
VSE The RatV2 18650 FetMech Multi-Tool - Scroll Down to Bottom for Information
VSE The RatV2 18650 FetMech Multi-Tool - Scroll Down to Bottom for Information
Share
Add to this Product
Specs: VSE The RatV2 18650 FetMech Multi-Tool - Scroll Down to Bottom for Information
A single cell MosFet fired (Clickfet) squonk device.
- 18650 Battery and PA12 only.
- Quick access clip in door which includes both with and without styling vents.
- The button cover is user removable to allow exchange of the firing button and all of the fire buttons for our Regulated devices fit!
Clickfet specs:
- Mosfet:- N-Channel 30v 100A LFPAK, RDSon 1.35m Ω (typ), VGS(th) 1.46v (typ)
- Operational voltage: 3.1 ± 0.1V - 4.20v
- Low voltage protection: 3.1 ± 0.1V
- Reverse polarity protection: Yes. Mod will auto fire but board will not burn out.
- Idle current: <10uA
- Timeout Protection: Yes
- Amp Limit: 46.67A (4.2v @ 0.09Ω)
Functions and LED Information
- Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED's flash 3 times and will not power the mosfet. This is also Short Protection.
- On/Off Function: When off, 5 clicks turns on and LEDs flash 5 times. When on, 5 clicks turns off and LED's flash 5 times.
- Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power the mosfet.
- Time Out Protection: If the mod is fired for 10 ± 1s the LEDs will flash 8 times and will stop powering the mosfet.
- Reverse Polarity Protection. If the battery is around the wrong way the mod will fire.
- In Use: When powering the mosfet the LEDs will be illuminated
With all MosFet mods, there is a chance of auto firing should the Fet fail. PLEASE REMOVE YOUR BATTERY WHEN UNATTENDED ie: sleeping.
BMM and it’s affiliates assume that you as an end user have a proper understanding of ohms law and safe vaping practices and does not take responsibility for accidents caused by improper or careless usage.